This fly, the Ivy Pheasant Craw, was submitted by message board member, Wendy Berrell. The notes and recipe are located here.
submitted by message board member jrs – here are the details:
Pink Squirrel Variant — John Stoeckel (jrs)
Except for the tail, all of the components of this fly have been changed from the original Bethke Pink Squirrel. But it still looks like a Pink Squirrel and it certainly evolved from the Pink Squirrel. The main changes have been inspired by the European / competitive nymphing community with an emphasis on making it a hard bodied, fast sinking “anchor” fly.
Hook: European / competition style jig hook #12
Thread: standard thread in black and orange
Weight: Gold brass or tungsten bead, 1/8”
Tail: 2 strands pearl Krystal Flash, split
Body: Black Ultra Wire, size BR
Collar: UV Pink Ice Dub
1) Slide the bead on the hook.
2) Wrap the black thread back to above the barb (if there was a barb)
3) Tie in a piece of Krystal Flash at an angle to the shank. Then fold back the long end and wrap it down at an angle on the opposite side to form a “V”. Trim to length.
4) Wind the thread back to the collar area and tie in the wire. Snip the black thread. Put a layer of cement on the hook shank. Wind the wire rearward in tight, touching wraps to the base of the tail (this is easiest with a rotary vise), then wrap the wire forward in an open spiral back to the collar area.
5) Tie on the orange thread. Secure and trim the wire.
6) Dub a short, tight noodle of UV Pink Ice Dub on the thread and wrap the collar.
7) Tie a whip finish and apply a drop of cement.
1) The competition style jig hooks are available from a number of brands – Allen J100BL, Umpqua C400BL. They are a slightly longer than a TMC 3769 hook of the same size with a 60 degree bend at the eye and a wider hook gap. They are also barbless, so if you use a trailer fly, you probably want to tie it to the eye of the jig (rather than the bend) so that it doesn’t slip off.
2) As with the Copper John, you can vary the color of the wire as you like. I’ve used black, gold, and red wire. I’ve also used two colors of wire – eg, black and gold – wrapped together to get a striped effect.